|
|
 |
 |
 |
SPECIAL PRODUCTS: Various Systems
|
 |
|
| |
Embedded Controller
|
 |
We manufacture for industrial applications an embedded contoller complete with five load cell imputs. The output connects direct to a computer via the USB Port. All channels have 200 samples per second. Various other inputs and outputs can be provided. Contact us for further information on this very smart product.
|
| PDF Document for: Embedded Controller |
 |
Item: |
Embedded Controller |
| Size: |
29.52 Kb |
|
|
|
|
| |
Load Limit Switches
|
 |
The load limit switch is activated from the deflection of the rope when the hook lifts the load. This increases the tension of the rope, which activates the device. Electrical connections can be wired into the hoist’s up or down motion.The limit switch can be used in slack rope situations. Units can be factory programmed to suit most applications.
If this product is of interest you will need to supply details of your configuration including the reeving, rope size, SWL, specify if the Alarm Cut Out"
|
| PDF Document for: Load Limit Switches |
| |
Item: |
Load Limit Switches |
| Size: |
18.54 Kb |
|
|
|
|
| |
Tension Meter
|
 |
All our Static Tensiometers employ a common operating principle, which is the measurement of the force required to produce a known deflection at the centre of a constant length of the rope / cable / rod under examination.
The deflection is produced by engagement of the central shoe or pulley mounted on an eccentric axle, operated by the central lever when engaged. A ball and spring assembly is incorporated in the central box to ensure stable eccentric location and therefore an accurate and reproducible deflection.
Reaction force to the rope deflection causes elastic bending of the meter frame between the shoes at the top and bottom of the frame. The degree of elastic bending of the frame is measured by a dial gauge or optional digital gauge indicator acting against an unstressed reference arm projecting the length of the meter. The dial gauge reading (analog or digital) and frame deflection are simply proportional to rope tension. However some non-linearity is introduced over the full working range of a meter, depending on the construction of the rope / cable / rod under test. A calibration curve must be generated for every item being calibrated.
Whilst calibration is simple, for the best accuracy the system must be setup using a known force."
|
| PDF Document for: Tension Meter |
| |
Item: |
Tension Meter |
| Size: |
508.96 Kb |
|
|
|
|
| |
Wind Speed Sensor
|
 |
A Solid State 2 dimensional Anemometer, no moving parts wind sensor. The sensor uses a special solid state device to measure wind speed and wind direction based on the temperature differences on the chip surface.
These temperature differences are processed by a microprocessor in the sensor to produce serial output signals indicating wind speed and wind direction.
The sensor base attaches onto a flat surface with 3 bolts and the sensor head clips in to allow easy orientation to north or to the front of the vehicle or vessel in mobile applications."
|
| PDF Document for: Wind Speed Sensor |
| |
Item: |
Wind Speed Sensor |
| Size: |
360.29 Kb |
|
|
|
|
| |
|
|
|
|
